REPLACING YOUR SIMON XT BATTERY 1) Go to your keypad and press down on the two tabs on the top of the keypad. This will allow for the front of the keypad to swing down. Some keypads have a screw at the top between the two tabs that may need to be ...
1. Remove back plate from touchscreen by pressing in bottom tab with screwdriver 2. Remove and replace 4 AAA Alkaline batteries, observe + / - placement 3. Route black antenna cable through back plate open slot 4. Click the touchscreen back on the ...
Below is a chart of the various sensors used with GE/ITI systems (predominantly the Simon series of alarm systems). Included is the Sensor Type (or typical use), Part #/Description (mostly used by dealers), Voltage, Type (of battery used), Quantity ...
Changing the batteries on your Simon motion detector can be a bit tricky, below are some tips/instructions on how to make it easier. Your Simon Motion will look like below To get the cover off, push the top tab and pull to release Once the cover is ...