What System Do I Have?
DSC Power/Classic Series
DSC SCW9047 DSC – Impassa (SCW9057)
DSC Maxsys/PC402
DSC NEO Series
HS2016/HS2032/HS2064/HS2128
GE/Interlogix
Simon XT Simon XTi Simon XTi-5
Concord NetworX NetworX
Simon 3
Qolsys IQ
IQ4 IQ2/IQ2+
Lynx Plus Lynx Touch 7000 Lynx Touch 5200
Vista Series
Related Articles
DSC Power Series - Non-alpha (Icon) Keypad system test
Here are step-by-step instructions on how to perform a system/communications test of your alarm system (DSC Power Series or DSC Power Series Neo) Security Alarm Monitoring System, and how to silence that beep: Call Reed Security Support (306-653-3200 ...DSC Alexor - System Test
Here are step-by-step instructions on how to perform a system/communications test of your alarm system (DSC Alexor) Security Alarm Monitoring System, and how to silence that beep: Call Reed Security Support (306-653-3200 option 3) or your Monitoring ...DSC Maxsys - System/Communications Test
This option will test the system. This bell/siren will activate for two seconds and system will send a test code transmission to the monitoring station. To start the System test, perform the following: Press [*] [6], then enter a valid access code ...Alarm.com - Delete User Codes From Alarm System
Delete User Codes using Customer Website: Important: User codes cannot be updated while the security system is armed. Verify the security system is disarmed before attempting to update a user code remotely. Log into the Alarm.com Customer Website. ...Simon 3 - Disconnecting Battery and Powering Down System
To disconnect the battery back up, press the top of the key pad to open the cover Take a small screw driver and gently press the tab below to open to the inside Use the screw driver to open the battery case as per below Disconnect the lead wires ...