DSC Alexor - System Test

DSC Alexor - System Test

Here are step-by-step instructions on how to perform a system/communications test of your alarm system (DSC Alexor) Security Alarm Monitoring System, and how to silence that beep:
Call Reed Security Support (306-653-3200 option 3) or your Monitoring Station prior to inform they you will be conducting a test.
  1. Press [*] [6]
  2. Enter Your Master Code
  3. Press [4]
  4. All keypad lights will activate, as will the keypad sounder and siren (2 seconds medium volume, 2 seconds high volume).
  5. For the duration of the test, the Ready, Armed and Trouble lights will flash.
  6. Call back Reed Security or the Monitoring Station once the tests are complete.
Users are responsible for regularly testing their system for proper function.

    • Related Articles

    • DSC Maxsys - System/Communications Test

      This option will test the system. This bell/siren will activate for two seconds and system will send a test code transmission to the monitoring station. To start the System test, perform the following: Press [*] [6], then enter a valid access code ...

    • DSC - Communications Failure Troubleshooting

      If your DSC alarm system is not communicating with the monitoring station, this is often due to some issue with the communications line (landline or cellular communicator). Often repair work or services changes have been made to the landline which ...

    • Simon XTi - Communications Test

      A communications test is used to check whether the alarm panel is communicating properly. If Comm Test is not finished, it will continue to run even if you exit program mode. To perform a local communications test (not logged by central station): ...

    • DSC Power Series - Non-alpha (Icon) Keypad system test

      Here are step-by-step instructions on how to perform a system/communications test of your alarm system (DSC Power Series or DSC Power Series Neo) Security Alarm Monitoring System, and how to silence that beep: Call Reed Security Support (306-653-3200 ...

    • DSC - Non-alpha Keypad communications test

      An non-alpha keypad has icons/images in the vertical column of keys of the right hand side of the keypad. Note: * If siren is on site, Doing a communication test will cause the siren to go off for 2 sec.           * Always call the monitoring station ...