battery
QOLSYS - Glassbreak sensor battery replacement
Requirements 2x CR123A Lithium Batteries System must be disarmed to prevent false alarms. Instructions: Open the Device - Press the tab on the top of the device and open it. The cover should swing down. This will cause the panel to beep rapidly due ...
Qolsys Sensors - Replacement Battery Guide
Below is a chart of the various sensors used with Qolsys systems (predominantly IQ & IQ2 series alarm systems). Included is the Sensor Type (primary use), Part #/Description (mostly used by dealers), Voltage, Type (of battery used), Quantity ...
Qolsys - Motion Detector Battery and Tamper Information
How to Replace Batteries and Locate Tamper on Qolsys Motion Detector Remove cover by depressing the tab on the top of the motion Replace Batteries (AAA) - notice the tamper switch (see arrows) if the cover is not connected/closed properly, the ...
Qolsys IQ2 - Battery Replacement
Swipe down from time display to open a drop-down box then press SETTINGS. Press Advanced Settings, then enter your Master Code Press Power Down then press OK to confirm, the IQ Panel 2 will turn off. Remove the bottom screen then press both bottom ...
Qolsys IQ - Battery Replacement
Qolsys IQ Panel – Battery Replacement Guide To replace the battery in your IQ panel, we'll need to power the panel down. 1. Select "Settings" 2. Enter your "Master Code" 3. Select "Power Down" 4. Select "OK" 5. Before continuing, wait till the ...
Qolsys IQ - Battery replacement
Power Down As per Qolsys IQ - Reboot/Power Down Replace Battery