DSC-PG9914 Motion Sensor Battery Replacement

• Related Articles

• DSC-PG9303 Battery Replacement

  PG9303—Battery Replacement When it is time to replace the battery in your door/window sensor, you will see an alert on your system panel, as well as a notification in the alarm.com app The DSC PG9303 door/window sensor requires a 3-volt lithium ...

• DSC PG9922—Glass Break Battery Replacement

  PG9922—Battery Replacement When it is time to replace the battery in your glassbreak detector, you will see an alert on your system panel, as well as a notification in the alarm.com app The DSC PG9922 glassbreak detector requires a CR123A batteries, ...

• DSC-PG9945 Battery Replacement

  Close PG9945—Battery Replacement When it is time to replace the battery in your door/window sensor, you will see an alert on your system panel, as well as a notification in the Alarm.com Mobile App The DSC PG9945 door/window sensor requires a 3-volt ...

• DSC-PG9904 Battery Replacement

  How to Replace the Battery on your PG9904 Motion Sensor Take small screw driver and remove the screw from the bottom of the sensor and remove cover Lift tab to remove the circuit board and turn it around to reveal the battery (CR 123A) Remove the ...

• DSC-PG9945 Battery Replacement

  How to replace the PG9945 battery The DSC PG9945 door/window sensor requires a 3-volt lithium CR123A battery, which can be purchased at your local hardware, mass retailer, or battery store. Step-by-Step Instructions: 1. Locate the sensor with a low ...