Alarm.com - Syncing your Skybell to your account

Alarm.com - Syncing your Skybell to your account

Syncing the Wi-Fi Doorbell Camera with Alarm.com is fast and simple via your Alarm.com customer app on your mobile device.
  1. Ensure the Doorbell Camera is flashing with a alternating Red/Green pattern.
  2. Download the Alarm.com App and log into your account.
  3. Go to the Doorbell Cameras tab and add A Doorbell Camera.
  4. Name your Doorbell Camera.
  5. Connect to Doorbell Camera's Temporary Wi-Fi Access Point (SkybellHD_##########). The app will instruct the user to connect to the doorbell camera’s Wi-Fi network
    1. iOS – leave the app and enter the settings app. Go to Wi-Fi and select the network named (SkybellHD_##########).
    2. Android – do not leave the app; the Alarm.com app will detect the doorbell camera’s network.
  6. Select the permanent Wi-Fi network for the doorbell camera.
  7. The Doorbell Camera will sync. The Doorbell camera’s LED will follow this pattern:
    1. Double-Flash Orange (~30 seconds)
    2. Alternating Blue/Green (~30 seconds)
    3. Solid Green
NB: Where network is labelled SkybellHD_##########, the '##########' refers to the device serial number.
NB: If the Skybell LED gets stuck on the double-flash orange mode, the incorrect Wi-Fi credentials have been input.

    • Related Articles

    • Alarm.com - Skybell Wireless Signal Strength

      If you are experiencing issues with your Skybell (doorbell camera) such as:  - Poor, inconsistent or no video captures  - Black screen when attempting to view at the door  - Poor video quality   Please check the wireless signal strength To check the ...

    • Alarm.com - Reconnecting or changing a doorbell camera's Wi-Fi network

      If you have added a wi-fi extender to your network in order to improve signal strength at the doorbell, you will need to delete the door bell from your account before re-adding it. Alarm.com - Deleting a video device/doorbell camera from client ...

    • Alarm.com - Client Account Locked

      When you fail too many attempts to log into your alarm.com account, you will be locked out of your account until the lock is removed manually. The lockout will not expire after a set period of time. You will have to either: Reset the account password ...

    • Alarm.com - Reboot or factory reset a SkyBell Doorbell Camera

      Reboot or factory reset a SkyBell Doorbell Camera The SkyBell Doorbell Camera can be rebooted locally using the doorbell's button. Option one: Doorbell Button reboot Press and hold the [Skybell] button (face of device) for approximately 50 seconds. ...

    • Alarm.com - Reconnect an ADC-VDB770 if the wireless network or router changes

      If the ADC-VDB770 disconnects from the user's network due to networking hardware replacement (e.g., a new router or access point) or Wi-Fi settings change, reconnect the device using AP mode or WPS. Reconnect the VDB770 using AP mode: The camera is ...