Qolsys IQ2 - Add or Remove bypass from a zone

To Bypass or Remove Bypass from a Zone: 

1. Press the unlocked picture to access arming options

2. When you see the "Arm Away" and the "Arm Stay" options, press the arrow key on the right hand side of the display screen to see the sensor status

3. See your programmed zones on the right hand side of the display.  Under "BYPASS" select the sensor you wish to bypass (check mark) or remove the check mark beside the zone you need to remove the bypass from.  

4. Select the arming option you wish to use to arm your system.

• Related Articles

• Qolsys IQ 2 - User Manual

  Attached is the Qolsys user manual for the IQ Panel 2.

• Qolsys IQ - Battery Replacement

  Qolsys IQ Panel – Battery Replacement Guide To replace the battery in your IQ panel, we'll need to power the panel down. 1. Select "Settings"  2. Enter your "Master Code" 3. Select "Power Down" 4. Select "OK" 5. Before continuing, wait till the ...

• Qolsys IQ - Battery replacement

  Power Down As per Qolsys IQ - Reboot/Power Down Replace Battery

• Qolsys IQ 4 - User Manual

                              Link for the Qolsys IQ Panel 4 user manual

• Qolsys IQ Panel 2 - Rebooting when Unresponsive

  On rare occasions, the IQ Panel 2 will become unresponsive to tapping the screen. At this time, the system has likely locked up (like your cell phone or computer). You can try a forced power down/reboot process by disconnecting the power from the ...