Simon XT - Turning the keypad beeps off.

Simon XT - Turning the keypad beeps off.

Reed Logo


1 Press the down arrow 5 times and you will see "System Programming"
2 Press OK followed by your master disarm code.
3 Press OK
4 Press the down arrow 4 times and you will see " Siren Options"
5 Press OK
6 You will see " Piezo Beeps" Press OK
7 Press the down arrow and "Off" should be flashing.
8 Press OK 
9 Press the Status button 4 times.

You Should be at your main screen and the beeping will not sound.



Reed Logo




    • Related Articles

    • Simon XT- Turning off Trouble Beeps

      To turn off the trouble beeps at your key pad: Scroll down on the Simon XT until you see "System Programming" Immediately press "OK" Enter your Master Code and press "OK" It will display "Access Codes" Scroll down until you see "Siren Options" Press ...
    • Simon XT - Power down

      1) Find your alarms Transformer ( plug in adapter) Usually in the mechanical room or in a designated place you and your reed security installer talked about. 2) Go to your keypad and press down on the two tabs on the top of the keypad. This will ...
    • Simon XTi - Silencing Trouble Beeps

      Disabling your trouble beeps should only be done when you're aware of the reason why it's beeping 1. Press the GEAR icon at the bottom righthand corner, then press the DOWN ARROW until you see Programming 2. Press ENTER by Programming and enter the ...
    • GE Concord - Silence Beeping

      If you would like to silence any trouble beeps on your keypad, press *(Status) or Arm and Disarm the system. The beeping will stop for 4 hours and return unless the issue has been rectified.
    • Simon XT - Managing User Codes

      To change user codes on a Simon XT: Enter the System menu by pressing one of the scroll buttons or the OK button in the upper right of the panel. Scroll until the display shows System Programming, and then press OK The display will show Enter Code. ...