Simon XTi - Set Time
Setting Time for a Simon XTi Panel
- Tap on the gear in lower corner of the screen.
- Tap on the down arrow to the last page.
- Tap the Enter button next to the top option labeled "Set Date/Time"
- Enter you four(4) digit MASTER CODE, tap OK button
- To make changes tap the spot that needs changed, enter the correct information, press OK button.
- When finished, Tap the button at the upper right "X CLOSE", until you get to the main screen.
Related Articles
DSC - Non-alpha Keypad, Set Time/Date
1) Press * followed by 6. 2) Enter in your master access code. (the code you use to disarm the system) Please note the master code is the only code that can make changes, A user code will not be able to make changes. 3) Press 1 4) Enter in the Hour, ...DSC - Alpha Keypad, Set Time/Date
1) Press * followed by 6. 2) You will be asked to enter in your master access code. (the code you use to disarm the system) Please note the master code is the only code that can make changes, A user code will not be able to make changes. 3) Press the ...Simon XTi - Reboot/Power Cycle
If your Simon XTi has stopped responding, often a quick restart or reboot may resolve the issue. The following is a simple procedure that take about 5 minutes to complete: Carefully pull the trim ring (B) off the edges of your panel. (Use notch, C, ...Simon XTi
User Manuals can be downloaded below by clicking on the link. Related Articles Simon XTi Quick Reference Guide Simon XTi Panel Battery Replacement Simon XTi - Default Screen Wireless Motion Battery ReplacementSimon XTi - Communications Test
A communications test is used to check whether the alarm panel is communicating properly. If Comm Test is not finished, it will continue to run even if you exit program mode. To perform a local communications test (not logged by central station): ...