DSC Power Series - Door Chime

DSC Power Series - Door Chime

Some client's like the extra security of knowing when a door is opened letting them know that someone has entered or left their location.

To turn on the Door Chime, press and hold the Chime button on the keypad for 2 seconds.   You can also press .
To turn off the chimes, press the same buttons again.

Reed Logo

    • Related Articles

    • DSC Power Series - PC1555 Frequent Asked Questions

      Find attached the FAQ for the DSC PC1555 system. It includes information on low battery, programming date and time, bypassing zones, turning the chime on and off, access code management, and arming options.

    • DSC Power Series Sensors - Replacement Battery Guide

      Below is a chart of the various sensors used with DSC systems (predominantly Power and Neo series alarm systems). Included is the Sensor Type (primary use), Part #/Description (mostly used by dealers), Voltage, Type (of battery used), Quantity ...

    • DSC NEO - Power G - Changing Door/Window Contact Batteries

      To change the batteries on your Power G door contact, use a small flat head screw driver insert into the side slats (gently twist to open) Use the screw driver to pop the battery out of place The device takes CR2032 batteries which can be purchased ...

    • DSC Power Series - Managing Trouble Alerts

      Press [ * ][2] to view a trouble condition The trouble light will flash Refer to the Trouble Summary chart below to determine the trouble condition(s) present TROUBLE SUMMARY Light [1][*] Service Required - Press [1] for more information [1] Low ...

    • DSC Power Series/NEO - Adjust the volume on Power Series and NEO keypads

      It is possible to adjust the volume level on DSC Power Series and NEO keypads. For Alpha keypads (buttons on the right-hand edge are words): Press [*] and then the [6] button on the keypad Enter your master Code Use the [<] Key to scroll through ...