If you want to power down an IQ Panel 2 to disable the system, complete the following steps: Press or swipe down clock at the top of the display for Settings Menu then press Settings. Select Advanced Settings then enter your Master Code to enter the ...
Access the Sounds Menu. Start from the home screen of the system. Press the small grey bar at the top of the screen. Choose Settings, followed by Advanced Settings. Then enter your Master Code. Then choose Sound. This will take you into the Sound ...
How to Adjust the Photo Display Settings Select the drop down menu from the top of the main screen and select "Photo Frame" From the Photo Frame menu - select "Settings" Scroll through the Menu Options. You can set the photo frame to "Nighttime ...
Find below an example of an installed Qolsys water sensor. The lower section is the actual water sensor while the upper section is the battery/transmitter. Click the image to see a larger version of the image.
To Bypass or Remove Bypass from a Zone: 1. Press the unlocked picture to access arming options 2. When you see the "Arm Away" and the "Arm Stay" options, press the arrow key on the right hand side of the display screen to see the sensor status 3. See ...
Panel Reboot OR Press and hold Home button (bottom right) for 30 seconds Power Down Press Settings Enter Master Code Press Power Down Press OK to confirm power down system
It is rare for the panel to freeze up and not respond, but if this happens, you'll need to reboot the system. If your system is DISARMED and it freezes, press and hold the Home button for 60 seconds. If the screen is displaying something, the screen ...