Simon XTi - Managing User Codes

Simon XTi - Managing User Codes


ADD/CHANGE USER CODES

1. Click on the GEAR icon at the bottom right then press DOWN ARROW several times



2. Press ENTER by Programming then enter your Master Code then press OK



3. Press ACCESS CODES then press the box by an empty User Code



4. Enter the new User Code then press SAVE then CLOSE to exit User Code programming

 

5. Press CLOSE to exit User programming



​

Reed Security Home

    • Related Articles

    • Simon XT - Managing User Codes

      To change user codes on a Simon XT: Enter the System menu by pressing one of the scroll buttons or the OK button in the upper right of the panel. Scroll until the display shows System Programming, and then press OK The display will show Enter Code. ...

    • Simon XTi - User Guide

      See attached 

    • SIMON XTI- PROGRAMMING DURESS CODES

      DURESS CODE DISARMS THE SYSTEM AND SENDS A SILENT ALARM TO REED SECURITY MONITORING STATION       1. Click the GEAR icon on the lower right hand side.  Use the down arrow to scroll until you see PROGRAMMING       2. Press the ENTER button and enter ...

    • Alarm.com - Managing user codes and access privileges on website

      ***!!!*** If you have not added a user Click Here.***!!!*** Go to alarm.com and log into your account. 1) If you have a user added already Click on Users. 2) From this page Click the edit icon on that user. 3) From here page click on the faded out ...

    • Alarm.com - Delete User Codes From Alarm System

      Delete User Codes using Customer Website: Important: User codes cannot be updated while the security system is armed. Verify the security system is disarmed before attempting to update a user code remotely.  Log into the  Alarm.com Customer Website.  ...