Qolsys IQ2 - Add or Remove bypass from a zone

To Bypass or Remove Bypass from a Zone: 

1. Press the unlocked picture to access arming options

2. When you see the "Arm Away" and the "Arm Stay" options, press the arrow key on the right hand side of the display screen to see the sensor status

3. See your programmed zones on the right hand side of the display.  Under "BYPASS" select the sensor you wish to bypass (check mark) or remove the check mark beside the zone you need to remove the bypass from.  

4. Select the arming option you wish to use to arm your system.

• Related Articles

• Qolsys IQ 2 - User Manual

  Attached is the Qolsys user manual for the IQ Panel 2.

• Qolsys IQ - Battery Replacement

  Qolsys IQ Panel – Battery Replacement Guide To replace the battery in your IQ panel, we'll need to power the panel down. 1. Select "Settings"  2. Enter your "Master Code" 3. Select "Power Down" 4. Select "OK" 5. Before continuing, wait till the ...

• Qolsys IQ 4 - User Manual

                              Link for the Qolsys IQ Panel 4 user manual

• Qolsys IQ Hub- Battery Replacement

  Replacing the Battery in your IQ Hub Security Panel Follow the instructions below to replace the backup battery in your system's panel. The IQ Hub panel requires a 18650 - rechargeable lithium polymer 2600mAh, which can be purchased at your local ...

• Qolsys IQ Panel 4 Hub - User Manual

  Link for the Qolsys IQ Panel 4 Hub user manual