Qolsys IQ - Battery replacement

Qolsys IQ - Battery replacement

Power Down

Replace Battery

    • Related Articles

    • Qolsys IQ - Battery Replacement

      Qolsys IQ Panel – Battery Replacement Guide To replace the battery in your IQ panel, we'll need to power the panel down. 1. Select "Settings"  2. Enter your "Master Code" 3. Select "Power Down" 4. Select "OK" 5. Before continuing, wait till the ...
    • Qolsys IQ2 - Battery Replacement

      Swipe down from time display to open a drop-down box then press SETTINGS. Press Advanced Settings, then enter your Master Code Press Power Down then press OK to confirm, the IQ Panel 2 will turn off. Remove the bottom screen then press both bottom ...
    • Qolsys Sensors - Replacement Battery Guide

      Below is a chart of the various sensors used with Qolsys systems (predominantly IQ & IQ2 series alarm systems). Included is the Sensor Type (primary use), Part #/Description (mostly used by dealers), Voltage, Type (of battery used), Quantity ...
    • QOLSYS - Glassbreak sensor battery replacement

      Requirements 2x CR123A Lithium Batteries System must be disarmed to prevent false alarms. Instructions: Open the Device - Press the tab on the top of the device and open it. The cover should swing down. This will cause the panel to beep rapidly due ...
    • DSC Alexor - Panel Battery Replacement

      Security system backup batteries are necessary for the proper operation of the system during a power outage. If the system reports the backup battery has low charge, it will not be able to support the system as long as it could with a full charge. If ...