Qolsys IQ Panel 2 - Power Down Panel

Qolsys IQ Panel 2 - Power Down Panel

If you want to power down an IQ Panel 2 to disable the system, complete the following steps:
  1. Press or swipe down clock at the top of the display for Settings Menu then press Settings.
  2. Select Advanced Settings then enter your Master Code to enter the Menu.
  3. Select Power Down and follow the instructions to power down the panel.
  4. If the screen is blank, you have successfully powered down the system. The system will be disabled until you power it back on. You can power the system back on by pressing and holding the designated power button on the right side.

    • Related Articles

    • Qolsys IQ 2 - User Manual

      Attached is the Qolsys user manual for the IQ Panel 2.
    • Qolsys IQ - Battery Replacement

      Qolsys IQ Panel – Battery Replacement Guide To replace the battery in your IQ panel, we'll need to power the panel down. 1. Select "Settings"  2. Enter your "Master Code" 3. Select "Power Down" 4. Select "OK" 5. Before continuing, wait till the ...
    • Qolsys IQ Panel 4 Hub - User Manual

      Link for the Qolsys IQ Panel 4 Hub user manual
    • Qolsys IQ 4 - User Manual

                                  Link for the Qolsys IQ Panel 4 user manual
    • Qolsys IQ - Panel Unresponsive

      It is rare for the panel to freeze up and not respond, but if this happens, you'll need to reboot the system. If your system is DISARMED and it freezes, press and hold the Home button for 60 seconds.  If the screen is displaying something, the screen ...