Qolsys IQ2 - Reboot/Power Cycle

Qolsys IQ2 - Reboot/Power Cycle

Complete the following steps to reboot your Qolsys IQ Panel 2 using the standard method:
  1. Access advanced settings. Start from the main screen of your IQ Panel 2. Press the small grey bar at the top of the screen. Choose Settings, followed by Advanced Settings. Then enter in your Master Code, After entering in the code, you will be in the advanced settings menu.
  2. Reboot the panel. Choose the option Panel Reboot. Then press OK to confirm. The panel will begin rebooting.
  3. Confirm the reboot. It will take a few moments for the reboot process to complete. The panel will then power back on automatically.

    • Related Articles

    • Qolsys IQ - Reboot/Power Down

      Panel Reboot OR Press and hold Home button (bottom right) for 30 seconds Power Down Press Settings Enter Master Code Press Power Down Press OK to confirm power down system

    • Qolsys IQ - Battery replacement

      Power Down As per Qolsys IQ - Reboot/Power Down Replace Battery

    • Qolsys IQ Panel 2 - Rebooting when Unresponsive

      On rare occasions, the IQ Panel 2 will become unresponsive to tapping the screen. At this time, the system has likely locked up (like your cell phone or computer). You can try a forced power down/reboot process by disconnecting the power from the ...

    • Simon XTi-Power Cycle/Power Down Panel

      HOW TO POWER CYCLE THE PANEL Insert a coin into the bottom right corner slot, then twist to remove the front faceplate. Pry the top two tabs up, then fold down front cover. Unplug the battery pack 4. Disconnect the AC transformer, then wait ...

    • DSC - Reboot/Power Cycle

      Note: Please always have your system disarmed before doing this. 1) We will need to find your security panel (This is usually in the mechanical room or in a place discussed at the time of install). 2) After finding the security panel we will need to ...