DSC - Non-alpha Keypad, Set Time/Date

DSC - Non-alpha Keypad, Set Time/Date


Reed Logo
1) Press * followed by 6.
2) Enter in your master access code. (the code you use to disarm the system)
Please note the master code is the only code that can make changes, A user code will not be able to make changes.
3) Press 1
4) Enter in the Hour, minute, Month, Day, Year.   Ex: 0930051515 for 9:30 AM May 15th, 2015
Please note that the time needs to be programmed as a 24hr clock and enter two digits for each value.
Example for Dec 28th 1988 (12/28/88)
5) After you have entered in the time and date press the # button 3 times and that will get you to the main screen.

***!!!***You have entered the time and date on your Keypad***!!!*** 


Reed Logo

    • Related Articles

    • DSC - Alpha Keypad, Set Time/Date

      1) Press * followed by 6. 2) You will be asked to enter in your master access code. (the code you use to disarm the system) Please note the master code is the only code that can make changes, A user code will not be able to make changes. 3) Press the ...

    • DSC - Non-alpha keypad, Control other partitions from one keypad (Partition Jumping)

      Note: This will work with the PC1616/PC1832/PC1864 Non Alpha keypad's 1) Using your Keypad press and hold the # button for 3 sec. Note: Partitions will have to be enabled by your installer and should of been talked about before the install.     2) ...

    • DSC - Non-alpha Keypad communications test

      An non-alpha keypad has icons/images in the vertical column of keys of the right hand side of the keypad. Note: * If siren is on site, Doing a communication test will cause the siren to go off for 2 sec.           * Always call the monitoring station ...

    • DSC Power Series - Non-alpha (Icon) Keypad system test

      Here are step-by-step instructions on how to perform a system/communications test of your alarm system (DSC Power Series or DSC Power Series Neo) Security Alarm Monitoring System, and how to silence that beep: Call Reed Security Support (306-653-3200 ...

    • DSC - Alpha Keypad communication test

      An alpha keypad has words in the vertical column of keys of the right hand side of the keypad. Note: * If siren is on site, Doing a communication test will cause the siren to go off for 2 sec.           * Always call the monitoring station before ...