GE/Interlogix Simon XT - Turning the keypad beeps off.
1 Press the down arrow 5 times and you will see "System Programming"
2 Press OK followed by your master disarm code.
3 Press OK
4 Press the down arrow 4 times and you will see " Siren Options"
5 Press OK
6 You will see " Piezo Beeps" Press OK
7 Press the down arrow and "Off" should be flashing.
8 Press OK
9 Press the Status button 4 times.
You Should be at your main screen and the beeping will not sound.
Related Articles
GE/Interlogix Simon XT - Managing User Codes
To change user codes on a Simon XT: Enter the System menu by pressing one of the scroll buttons or the OK button in the upper right of the panel. Scroll until the display shows System Programming, and then press OK The display will show Enter Code. ...
GE/Interlogix Concord - Silence Beeping
If you would like to silence any trouble beeps on your keypad, press *(Status) or Arm and Disarm the system. The beeping will stop for 4 hours and return unless the issue has been rectified.
GE/Interlogix Simon XTi - User Guide
See attached
GE/Interlogix Simon XT - Troubleshooting Trouble Beeps and Messages
Your security system is able to automatically test itself for: Power failures Low batteries Communication troubles with sensors Communication troubles with the central monitoring station When your security system detects one of the problems above, ...
GE/Interlogix Simon XT - Power down
1) Find your alarms Transformer ( plug in adapter) Usually in the mechanical room or in a designated place you and your reed security installer talked about. 2) Go to your keypad and press down on the two tabs on the top of the keypad. This will ...