SIMON GE-Interlogix 60-670-95R Door Window Sensor Battery
To Replace the batteries in your Interlogix Door Contact:
Related Articles
GE/Interlogix Sensors - Replacement Battery Guide
Below is a chart of the various sensors used with GE/ITI systems (predominantly the Simon series of alarm systems). Included is the Sensor Type (or typical use), Part #/Description (mostly used by dealers), Voltage, Type (of battery used), Quantity ...GE/Interlogix Simon XTi - User Guide
See attachedQOLSYS Door/Window Sensor - Battery Replacement
Qolsys QS1135-840 Door/Window Sensor: Insert a screwdriver into the slot found on the top/bottom of the cover to remove, then remove and replace 2 CR2032 batteries. When closing the sensor, ensure it is snapped together tightly and aligned properly ...GE/Interlogix Simon XT - Replacing Panel Battery
REPLACING YOUR SIMON XT BATTERY 1) Go to your keypad and press down on the two tabs on the top of the keypad. This will allow for the front of the keypad to swing down. Some keypads have a screw at the top between the two tabs that may need to be ...GE/Interlogix Simon 3 - Adjusting Status Sound Volume
It is possible to adjust the volume of the Status Sound on your Simon 3 alarm panel, such as arming beeps, trouble beeps, and status beeps. The lowest volume setting is 1, the highest is 10. If you are turning down the volume of trouble beeps during ...