DSC Power Series - Non-Alpha keypad, Manage user codes

DSC Power Series - Non-Alpha keypad, Manage user codes

Reed Logo





Please Note that 40 is your master code.
For a PC 1616 you have 1-48 user slots
For a PC 1832 you have 1-72 user slots
For a PC 1864 you have 1-95 user slots
Adding a user code

1) Press the * button followed by 5
2) Enter your system’s master code (Disarm code) If you hear 3 quick beeps you are in programming. If you hear a long beep, The code you have entered is not the master code.
    Note: Only the master code can make changes. User codes can only arm and disarm.
3) You will see program and numbers flashing to indicate what user codes are programmed as of right now, (example 3,4,40. Stating that user code 03,04 and 40 are programmed)

4) Select the two digit user that is available next to program. ( Example: As you saw in our last example 3,4 and 40 were flashing. Our next available user code to program is 1 or 2. For user 2 you would press 02,)
5) Use the number keys to enter the four digit user code you want for that user.
6) When programming is complete you can enter another 2 digit for another user or Press # 3 times to get to your main screen.




Changing user code

1) Press the * button followed by 5
2) Enter your system’s master code (Disarm code) If you hear 3 quick beeps you are in programming. If you hear a long beep, The code you have entered is not the master code.
    Note: Only the master code can make changes. User codes can only arm and disarm.
3) You will see program and numbers flashing to indicate what user codes are programmed as of right now, (example 3,4,40. Stating that user code 03,04 and 40 are programmed)


4) Select the two digit user that you are wanting to change. ( Example: As you saw in our last example 3,4 and 40 were flashing For user 3 you would press 03)
5) Use the number keys to enter the new four digit user code you want for that user.
6) When programming is complete you can enter another 2 digit for another user or Press # 3 times to get to your main screen.

Deleting a user code


1) Press the * button followed by 5
2) Enter your system’s master code (Disarm code) If you hear 3 quick beeps you are in programming. If you hear a long beep, The code you have entered is not the master code.
    Note: Only the master code can make changes. User codes can only arm and disarm.
3) You will see program and numbers flashing to indicate what user codes are programmed as of right now, (example 3,4,40. Stating that user code 03,04 and 40 are programmed)
4) Select the two digit user that you are wanting to delete. ( Example: As you saw in our last example 3,4 and 40 were flashing For user 3 you would press 03)
5) Press * this will delete the code you are on.
6) When programming is complete you can enter another 2 digit for another user or Press # 3 times to get to your main screen.




Reed Logo


 

    • Related Articles

    • DSC Power Series - Alpha keypad, Manage user codes

      Please Note that user code 40 is your master code For a PC 1616 you have 1-48 user slots For a PC 1832 you have 1-72 user slots For a PC 1864 you have 1-95 user slots 1) From your keypad press * followed by 5. 2) Enter in your master code. (Disarm ...
    • DSC Power Series - Manage user codes

      Your keypad may look like this: Please Note that user code 40 is your master code For a PC 1616 you have 1-48 user slots For a PC 1832 you have 1-72 user slots For a PC 1864 you have 1-95 user slots Add an Access Code: · Press the * button followed ...
    • DSC NEO 2016/2032/2064/2128 - Manage user codes

      Your keypad may look like this:  Please Note that user code 01 is your master code For a PC 2016 you have 1-48 user slots For a PC 2032 you have 1-72 user slots For a PC 2064/2128 you have 1-95 user slots  Add an Access Code: ·          Press the ...
    • DSC Power Series - Non-alpha Keypad, Set Time/Date

      1) Press * followed by 6. 2) Enter in your master access code. (the code you use to disarm the system) Please note the master code is the only code that can make changes, A user code will not be able to make changes. 3) Press 1 4) Enter in the Hour, ...
    • DSC Power Series - Non-alpha keypad, Control other partitions from one keypad (Partition Jumping)

      Note: This will work with the PC1616/PC1832/PC1864 Non Alpha keypad's 1) Using your Keypad press and hold the # button for 3 sec. Note: Partitions will have to be enabled by your installer and should of been talked about before the install. 2) Press ...