DSC - PC1555 Frequent Asked Questions

DSC - PC1555 Frequent Asked Questions

Find attached the FAQ for the DSC PC1555 system. It includes information on low battery, programming date and time, bypassing zones, turning the chime on and off, access code management, and arming options.
    • Related Articles

    • DSC - Alpha Keypad, Set Time/Date

      1) Press * followed by 6. 2) You will be asked to enter in your master access code. (the code you use to disarm the system) Please note the master code is the only code that can make changes, A user code will not be able to make changes. 3) Press the ...
    • DSC - Non-alpha Keypad, Set Time/Date

      1) Press * followed by 6. 2) Enter in your master access code. (the code you use to disarm the system) Please note the master code is the only code that can make changes, A user code will not be able to make changes. 3) Press 1 4) Enter in the Hour, ...
    • DSC - Quick Reference Guide

      Arming Your System:  Make sure all doors & windows (with sensors) are closed. Wait for the ready light (green check mark) to  come on. Enter your 4 digit access code or use the “stay” or “away” buttons.  ...
    • DSC Power Series 9047 - Panel Battery Replacement

      Locate AC power and disconnect from power socket; Using a flat-head screwdriver, pry open the keypad by inserting the screwdriver into the two slots found on the bottom-front of your keypad (there may be a retention screw on the underside); ...
    • DSC - Panel Battery Replacement

      Note: Please always have your system disarmed before doing this. 1) We will need to find your security panel. (This is usually in the mechanical room or in a place discussed at the time of install). 2) After finding the security panel we will need to ...