DSC Impassa - Managing Trouble Alerts

DSC Impassa - Managing Trouble Alerts

On an Impassa system, the Trouble Acknowledgement feature may be used to acknowledge and clear old troubles and possibly override existing troubles, so the system can be armed. To use this feature:
  1. Press [*][2] to enter the Trouble menu.
  2. Scroll left or right using the [<][>] keys to "Trouble Acknowledgement"
  3. Press [*] or [9] to override/acknowledge the trouble.
  4. If a current trouble is overridden (to allow arming of the system), an Override event will be logged identifying the user. For open, faulted, or tampered zones/sensors, use the Zone Bypass feature using [*][1].
If you have any questions about these instructions or you continue to have trouble alerts, contact the Reed Security Support Desk.

    • Related Articles

    • DSC Maxsys - Managing Trouble Alerts

      On an Maxsys system, the Trouble Acknowledgement feature may be used to acknowledge and clear old troubles. To use this feature: Press [*][2] Use the arrow keys, [<][>], to scroll through the list of trouble conditions If you have any questions about ...

    • DSC NEO 2016/32/64/128 - Managing Trouble Alerts

      If the Trouble Light (yellow triangle) is lit, one or more unacknowledged trouble has been reported. To view the trouble codes: Press [*][2] then scroll [<] and [>] to view trouble codes Press [*] to view further details of a particular trouble alert ...

    • DSC PC 1616/1832/1864 - Managing Trouble Alerts

      Press [ * ][2] to view a trouble condition The trouble light will flash Refer to the Trouble Summary chart below to determine the trouble condition(s) present TROUBLE SUMMARY Light [1][*] Service Required - Press [1] for more information     [1] Low ...

    • Simon XTi - Silencing Trouble Beeps

      Disabling your trouble beeps should only be done when you're aware of the reason why it's beeping 1. Press the GEAR icon at the bottom righthand corner, then press the DOWN ARROW until you see Programming 2. Press ENTER by Programming and enter the ...

    • DSC Impassa - Volume Control

      DSC systems refer to their built-in sounder as the "buzzer". The DSC Impassa has 21 different buzzer volume levels that can be used. Setting the system to the lowest level will mute the keypad entirely. The volume for the system can be changed at any ...