DSC - Door Chime (Entry/Exit Beeps)

DSC - Door Chime (Entry/Exit Beeps)

Some client's like the extra security of knowing when a door is opened letting them know that someone has entered or left their location.

To turn on the Door Chime, press and hold the Chime button on the keypad for 2 seconds.   You can also press .
To turn off the chimes, press the same buttons again.

Reed Logo

    • Related Articles

    • DSC - PC1555 Frequent Asked Questions

      Find attached the FAQ for the DSC PC1555 system. It includes information on low battery, programming date and time, bypassing zones, turning the chime on and off, access code management, and arming options.

    • Simon XTi - Silencing Trouble Beeps

      Disabling your trouble beeps should only be done when you're aware of the reason why it's beeping 1. Press the GEAR icon at the bottom righthand corner, then press the DOWN ARROW until you see Programming 2. Press ENTER by Programming and enter the ...

    • DSC - Power G - Changing Door/Window Contact Batteries

      To change the batteries on your Power G door contact, use a small flat head screw driver insert into the side slats (gently twist to open)  Use the screw driver to pop the battery out of place The device takes CR2032 batteries which can be purchased ...

    • Simon XT - Change Volume/Vocal Settings

      Please follow the below instructions to make changes to the volume levels of your beeps or panel voice.  1. Piezo Beeps: - These are the beeps the panel makes for system activity (eg. I opened the front door and my panel beeped. When I arm the panel ...

    • DSC- WS4945 Door/Window Battery Replacements

      To replace the battery: