DSC Power Series - Non-alpha keypad, Control other partitions from one keypad (Partition Jumping)
Note: This will work with the PC1616/PC1832/PC1864 Non Alpha keypad's
1) Using your Keypad press and hold the # button for 3 sec.
Note: Partitions will have to be enabled by your installer and should of been talked about before the install.
2) Press and hold the number button to what partition you want to control for 3 Sec.
* You will Hear 1 beep followed by 3 quick beeps.
* You are now controlling the partition you selected.
3) To get back to your partition you were on before, Do the same steps but select the partition you were on before. You could also let the keypad time out.
Note: After 30 sec of the keypad not being used it will default back to the partition it is assigned to.
Related Articles
DSC Power Series - Alpha keypad, Control other partitions from one keypad (Partition Jumping)
Note: This will work with the PC1616/PC1832/PC1864 Alpha keypad's 1) Using your Keypad press and hold the # button for 3 sec. * Your will see The number of partitions enabled usually 1,2 or 3 but could go all the way to 8. Note: Partitions will have ...DSC Power Series - Non-alpha Keypad, Set Time/Date
1) Press * followed by 6. 2) Enter in your master access code. (the code you use to disarm the system) Please note the master code is the only code that can make changes, A user code will not be able to make changes. 3) Press 1 4) Enter in the Hour, ...DSC Power Series - Non-alpha (Icon) Keypad system test
Here are step-by-step instructions on how to perform a system/communications test of your alarm system (DSC Power Series or DSC Power Series Neo) Security Alarm Monitoring System, and how to silence that beep: Call Reed Security Support (306-653-3200 ...DSC Power Series - Non-alpha Keypad communications test
An non-alpha keypad has icons/images in the vertical column of keys of the right hand side of the keypad. Note: * If siren is on site, Doing a communication test will cause the siren to go off for 2 sec. * Always call the monitoring station before ...DSC Power Series/NEO - Adjust the volume on Power Series and NEO keypads
It is possible to adjust the volume level on DSC Power Series and NEO keypads. For Alpha keypads (buttons on the right-hand edge are words): Press [*] and then the [6] button on the keypad Enter your master Code Use the [<] Key to scroll through ...