DSC - Non-alpha Keypad communications test
An non-alpha keypad has icons/images in the vertical column of keys of the right hand side of the keypad.
Note: * If siren is on site, Doing a communication test will cause the siren to go off for 2 sec.
* Always call the monitoring station before testing your system at 1 800 268 6870
1) On your keypad press * 6 followed by you master code. (Disarm code) You will see program.
* This next step will cause the siren to go off if equipped on site.
2) Press 4.
* Siren will sound for 2 sec.
3) Call the monitoring station at 1 800 268 6870 to see if your signal went threw.
Note: If your communication test did not go through to the monitoring station call Reed Security support at 1 306 653 3200 - Option 3
Related Articles
DSC - Alpha Keypad communication test
An alpha keypad has words in the vertical column of keys of the right hand side of the keypad. Note: * If siren is on site, Doing a communication test will cause the siren to go off for 2 sec. * Always call the monitoring station before ...DSC Power Series - Non-alpha (Icon) Keypad system test
Here are step-by-step instructions on how to perform a system/communications test of your alarm system (DSC Power Series or DSC Power Series Neo) Security Alarm Monitoring System, and how to silence that beep: Call Reed Security Support (306-653-3200 ...DSC - Communications Failure Troubleshooting
If your DSC alarm system is not communicating with the monitoring station, this is often due to some issue with the communications line (landline or cellular communicator). Often repair work or services changes have been made to the landline which ...DSC Maxsys - System/Communications Test
This option will test the system. This bell/siren will activate for two seconds and system will send a test code transmission to the monitoring station. To start the System test, perform the following: Press [*] [6], then enter a valid access code ...DSC Alexor - System Test
Here are step-by-step instructions on how to perform a system/communications test of your alarm system (DSC Alexor) Security Alarm Monitoring System, and how to silence that beep: Call Reed Security Support (306-653-3200 option 3) or your Monitoring ...