DSC Power Series/NEO - Adjust the volume on Power Series and NEO keypads

DSC Power Series/NEO - Adjust the volume on Power Series and NEO keypads

It is possible to adjust the volume level on DSC Power Series and NEO keypads.

For Alpha keypads (buttons on the right-hand edge are words):
  1. Press [*] and then the [6] button on the keypad
  2. Enter your master Code
  3. Use the [<] Key to scroll through buzzer volume levels
  4. When you have chosen he desired level, press the [#] Key. This will save the volume level.
For Non-Alpha keypads (buttons on the right-hand edge are icons): 
  1. Press [*] and then the [6] button on the keypad
  2. Enter your master Code
  3. Use the [<] and [>] Key to scroll through the programming options until to reach Buzzer Control
  4. Press [*] to select Buzzer Control
  5. Use the [<] and [>] Keys to scroll through buzzer volume levels
  6. When you have chosen he desired level, press the [#] Key. This will save the volume level.

    • Related Articles

    • DSC Power Series Sensors - Replacement Battery Guide

      Below is a chart of the various sensors used with DSC systems (predominantly Power and Neo series alarm systems). Included is the Sensor Type (primary use), Part #/Description (mostly used by dealers), Voltage, Type (of battery used), Quantity ...

    • DSC Power Series - Non-alpha (Icon) Keypad system test

      Here are step-by-step instructions on how to perform a system/communications test of your alarm system (DSC Power Series or DSC Power Series Neo) Security Alarm Monitoring System, and how to silence that beep: Call Reed Security Support (306-653-3200 ...

    • DSC NEO Wireless Keypad - Replacing Batteries

      All DSC Wireless keypads use 4x AA batteries. When replacing them, we strongly recommended you use newly purchased, brand name batteries. Using off brand or no name batteries, or ones that have been sitting on a shelf or in a drawer at home) .To ...

    • Alarm.com - Bypass a Sensor on a DSC Power Series NEO

      On the DSC PowerSeries Neo, there are multiple options to bypass sensors remotely using the customer website or customer app. See attached article taken from alarm.com site.

    • DSC Power Series - Alpha keypad, Control other partitions from one keypad (Partition Jumping)

      Note: This will work with the PC1616/PC1832/PC1864 Alpha keypad's 1) Using your Keypad press and hold the # button for 3 sec. * Your will see The number of partitions enabled usually 1,2 or 3 but could go all the way to 8. Note: Partitions will have ...