Alarm.com - What do the LEDs on the ADC-VDB770 mean?
Status light guide
Note: The ADC-VDB770 does not give an indication when it detects motion or a button press.
LED pattern | Description |
---|
Off 
| Power off |
Solid red 
| No local or Internet connection |
Blinking red 
| Power on, camera booting |
Solid green 
| Connected to Alarm.com |
Blinking green 
| Local network connection |
Double-blinking blue 
| Unable to ring indoor chime For more information about what causes this status, contact Reed Security support |
Solid yellow 
| Cool-Down mode is active For more information about what causes this status, contact Reed Security support |
Blinking blue 
| WPS mode (press and hold button for 30-35s) |
Blinking white 
| Wi-Fi Access point mode (press and hold button for 35-40s) |
Blinking yellow 
| Camera power cycling (press and hold button for 40-45s) |
Alternating red & green 
| Camera resetting to factory default (press and hold button for 45-50s) |
Note: If the indoor chime is enabled for the device, holding down the button will trigger a single indoor chime immediately after being pressed. If desired, the indoor chime can be disabled through the Customer Website before pressing the button to initiate one of the above modes.