Alarm.com - Smart Thermostat Battery Replacement

Alarm.com - Smart Thermostat Battery Replacement

The Alarm.com Smart Thermostat (ADC-T2000) can be powered by four AA Alkaline batteries.

Considerations:
  1. If there are no batteries inserted, and the thermostat is running off solely of AC power, the thermostat will report a low battery (indicated by LOW then BATT flashing on the display).
  2. Always replace the batteries as soon as you have low battery levels. If the batteries drain, the thermostat could leave the HVAC system on or off, overheating, or freezing the home.
  3. Always replace the batteries at least once a year. This will protect the thermostat from damage and corrosion by leaking batteries.
  4. If the home is unoccupied for a month or more, such as vacation homes, you should replace the batteries as a preventive measure against battery failure while you are away.
  5. Always use new, brand name batteries as replacements.
To replace the batteries in the Alarm.com Smart Thermostat (ADC-T2000):
Ensure the batteries are installed following the specified polarity markings on the thermostat.
  1. Open the back panel.
  2. Insert four new AA batteries. 

  3. Close the back panel.

    • Related Articles

    • Alarm.com - Z-Wave device reporting Malfunction

      The Malfunction trouble condition indicates a device (e.g., sensor, Z-Wave, Geo-Device, etc.) is unable to properly communicate. How to resolve: Verify that the device is still active and powered on. Power cycle the device. Verify there is nothing ...

    • Alarm.com - Add Z-Wave devices remotely

      Customers can enroll devices remotely With the Add Device Portal, customers can also enroll certain devices themselves using the Customer Website or Customer app. Important: The Add Device Portal must be enabled for the following options to appear.  ...

    • ALARM.COM - Changing the Batteries on an Alarm.com Smart Thermostat

    • Alarm.com - Quikset Deadbolt - Battery Change

      Kwikset 914 Deadbolt – Battery Replacement And you are done!! If you have questions or require further assistance - support can be reached at 306-653-3200 option 3 or by email at support@reedsecurity.ca Monday through Friday 8am to 4:30pm. 

    • Alarm.com - Mobile App Troubleshooting

      Having troubles using your Alarm.com App? Is ii reporting failed updates, freezing up, not showing the correct status? First check the App and device. Please try these steps, one at a time, and check to see if your App is working after each. The ...