Alarm.com - How does the Video Doorbell Temperature Collar work?

Alarm.com - How does the Video Doorbell Temperature Collar work?

The Video Doorbell Temperature Collar (ADC-VDBA-TC) is a molded polymer that matches the shape of the area between the ADC-VDB770 back plate and the mounting surface (whether a mounting bracket is used or not). 

The temperature collar is designed to be used in very cold environments (i.e., below -30C) to extend the operational range of the ADC-VDB770. The ADC-VDB770 is designed to work with full functionality in environments as low as -30C ambient without the collar but -40C ambient with the collar properly installed. The temperature collar blocks airflow to the heat sink so that the device more efficiently retains the heat generated from internal components.

Installation
  1. Separate the collar at the bottom.
  2. Place the collar around the back of the backplate of an already mounted ADC-VDB770.
  3. Push the collar firmly against the mounting surface and/or mounting bracket so that the fins on the backplate are no longer visible.
  4. Reattach the two ends of the collar by pulling them together.
VDB770_doorbell_090220_thermal blanket_04_25.png
    • Related Articles

    • Alarm.com - Manually record video clips

      Alarm.com customers with live video enabled can request a video device recording using the Customer Website or app at any time. Manually requested video clips are approximately 50-60 seconds in length, including about 10-15 seconds of footage from ...
    • Alarm.com - View Doorbell Camera live video stream

      The Skybell Doorbell Camera live video stream is only viewable from the following devices: The Customer app on an Apple or Android mobile device (e.g., smartphone or tablet). The Qolsys IQ Panel 2 with the required settings. Users can also answer ...
    • Alarm.com - Reconnecting or changing a doorbell camera's Wi-Fi network

      If you have added a wi-fi extender to your network in order to improve signal strength at the doorbell, you will need to delete the door bell from your account before re-adding it. Alarm.com - Deleting a video device/doorbell camera from client ...
    • Alarm.com - Reconnect an ADC-VDB770 if the wireless network or router changes

      If the ADC-VDB770 disconnects from the user's network due to networking hardware replacement (e.g., a new router or access point) or Wi-Fi settings change, reconnect the device using AP mode or WPS. Reconnect the VDB770 using AP mode: The camera is ...
    • Alarm.com - Deleting a video device/doorbell camera from client account (2022)

      To delete a video device using the Customer app: Log into the Customer app. Tap .  Tap Manage Devices. Tap  next to the desired device. In Actions, tap Remove Device. Tap Remove. To delete a video device using the Customer Website: Log into the ...